Features

• S/T or U Interface
• ISA/AT or PCI
• Plug and Play
  • ISA : Microsoft / Intel Standard
  • PCI : PCI Local Bus Specification Rev. 2.1
• Basic Rate Interface (2 x 64 Kbps with each B-channel and 1 x 16 Kbps with the D-channel)
• Interface to the PC
  • ISA / AT : 8 Bit
  • PCI : 32 Bit
• Telephony Interface (8 pin MiniDIN Connector)

Connection Types

• Switched & Permanent

B-Channel Protocols

• HDLC
• X.75
• X.25
• T.90 NL
• T.70 NL
• V.120

D-Channel Protocols

Supported Standard Interfaces

Configuration Interrupts

• ISA/AT: 2,3,5,7,10,11,12,14,15
• PCI: Interrupt configuration and handling is automatically done by the system

I/O Addresses

• ISA/AT: 16 Addresses with 8 Bytes configurable in the range of 200H to 3E0H
• PCI: 32 Bytes distributed by the system

DOS Memory Requirement

• Reduced memory requirement with DPMS

Fax Capabilities

• Group 4
• Group 3 (requires 3rd Party Software)

Rate Adaption

Diagnostic Tools

Power Requirements

• ISA / S/T: 190 mA @ +5 Volts
• ISA / U: 170 mA @ +5 Volts
• PCI / S/T: 200 mA @ +5 Volts
• PCI / U: 220 mA @ +5 Volts

Certification

• FCC Class B, Part 15, Part 68
• Industry Canada (formerly DOC)
• CE168X marking
• BAKOM
• BZT

Minimum Hardware Requirements

• 80386 or higher
• Appropriate Operating System

Supported Operating Systems

• DOS
• Windows for Workgroups 3.11
• Windows 95
• Windows NT

DIVA 2.0 POTS Option

The POTS option is a complimentary product to the Diva 2.0 ISDN interface card when using Windows 95 ONLY. This device allows the connection of a regular telephone, fax machine or analog modem for operation over an ISDN line.

The DIVA POTS Option is extremely handy for users who have access to ISDN but don't have separate analog lines – or want to avoid the expense of them. Simply add the DIVA POTS Option to your DIVA 2.0, plug in any analog devices, and you have an instant virtual office that needs only the ISDN line for all communications.

Product Highlights