FT2200 (X1B) - Memory, Cache & Video RAM Options

FT2200 (X1B)
Memory, Cache & Video RAM Options (rel : 3.00)

Revision	Processor	Base Memory	Cache	Video & VRAM
X1B	Pentium Pro™ 200	32MB	256KB	CL-GD5429 - 1MB
	Dual Pentium Pro™ 200	32MB	256KB x 2	CL-GD5429 - 1MB

Memory Expansion Options

Additional Processor

Description	Product Code
Single to Dual Pentium Pro™ at 200MHz, 256KB cache	UF58296

RAM Configuration

The memory board comes already installed with the basic system. A total of eight memory banks composed of 16 x 72-pin SIMM sockets reside on the board. The sockets accept 8-MB, 16-MB, 32-MB, and 64-MB SIMMs (when available) for a maximum of 1-GB memory configuration.

Adhere to the following rules when you add system memory.

Always install SIMMs from bank 0. You should use the memory banks consecutively.

Always install SIMMs in pairs to fill up a bank. For example, for a total memory of 16MB, install two 8-MB SIMMs in a bank. You can not use a single 16-MB SIMM for a 16-MB configuration.

Use only fast-page mode parity SIMMs.

Install SIMMs of the same capacity in a configuration. For example, do not mix an 8-MB SIMM with a 16-MB SIMM.

X1bmembd.gif (18572 bytes)

Bank 0	Bank 1	Bank 2	Bank 3	Bank 4	Bank 5	Bank 6	Bank 7	Total Memory
8MB*2								16 MB
8MB*2	8MB*2							32 MB
8MB*2	8MB*2	8MB*2	8MB*2					64 MB
8MB*2	8MB*2	8MB*2	8MB*2	8MB*2	8MB*2	8MB*2	8MB*2	128 MB
16MB*2								32 MB
16MB*2	16MB*2							64 MB
16MB*2	16MB*2	16MB*2	16MB*2					128 MB
16MB*2	16MB*2	16MB*2	16MB*2	16MB*2	16MB*2	16MB*2	16MB*2	256 MB
32MB*2								64 MB
32MB*2	32MB*2							128 MB
32MB*2	32MB*2	32MB*2	32MB*2					256 MB
32MB*2	32MB*2	32MB*2	32MB*2	32MB*2	32MB*2	32MB*2	32MB*2	512 MB
64MB*2								128 MB
64MB*2	64MB*2							256 MB
64MB*2	64MB*2	64MB*2	64MB*2					512 MB
64MB*2	64MB*2	64MB*2	64MB*2	64MB*2	64MB*2	64MB*2	64MB*2	1024 MB

SIMM Memory Expansion

Description	Product Code
32MB upgrade (2 x 16MB SIMMs, 36-bit)	UF58299
64MB upgrade (2 x 32MB SIMMs, 36-bit)	UF58300