|
|
|
HP C1553A DDS 2 Autoloader
Specification
Apricot Part Number |
PT15904431 |
Vendor |
H.P. |
Series |
DDS 2 AL |
Model |
C1553A |
Form Factor |
5.25" HH |
Height |
3.2" / 82mm |
Width |
5.7" / 146mm |
Length |
8.0" / 203.2mm |
Weight |
4.8lbs / 2.2Kg |
Tape Type |
DDS-2 120m 4mm DAT |
Tape Length |
120m |
Capacity Native |
6x4GB=24GB |
Capacity Compressed @2:1 |
6x8GB=48GB |
Recording Media |
MP+ |
Cartridge Size (W x D) |
73 x 53mm |
Flux Density |
76,250 ftpi |
Tracks |
2,804 trks/inch |
Performance
Transfer Rate, @ 2:1 Burst |
1MB/s |
Transfer Rate, Native Burst |
500KB/s |
Head to Tape Speed, Read / Write |
355 ips |
Search / Rewind |
100x normal |
Physical Interface |
SE 8bit SCSI |
Logical Interface |
SCSI-2 |
Maximum Transfer Rate |
5MB/s |
Buffer Size |
1MB |
Hardware Compression |
Yes, DCLZ |
Recording Method |
Helical Scan |
Recording Code |
DDS-DC |
Error Recovery Type |
Reed S'mon C3 |
Read after Write Verify |
Yes |
Correctable Read Error Rate |
1 in 104 bits |
Uncorrectable Read Error Rate |
1 in 1015 bits |
Environment
Minimum Ambient operating Temperature |
5°C |
Maximum Ambient operating Temperature |
45°C |
Maximum Thermal Gradient |
2°C/minute |
Average Power Consumption |
Combined |
Operating Maximum |
28W |
Nominal Read / Write |
9W |
Nominal Idle |
9W |
DC Power Requirements |
Combined |
+12V Peak |
2.00Amps |
+12V Operational Nominal |
0.20Amps |
+5V Peek |
1.20Amps |
+5V Stepping Head Nominal |
1.20Amps |
MTBF |
35,000 poh |
Jumpers & Switches
|