Audio Daughterboard

The optional motherboard sound system is a Creative Labs Vibra16. Audio output from the CD-ROM drive is internally connected to the Vibra sound system.

There is a built-in amplifier suitable for driving headphones and passive speakers. Phantom power is provided for microphone types that require this facility (Electret type). Speakers and microphone should be 8 Ohm impedance minimum.

1. Speakers 4. Microphone 2. Line out 5. Joystick/MIDI port 3. Line in

Expansion Slots

1. Full PCI 3. Full ISA 2. Full PCI / ISA shared slot

Front View for LS/VS/MS 660

1. Energy saving button and LED 6. Power button 2. Internal speaker grill (This speaker cuts off when external speakers connected) 7. Front audio connections: Upper - Speakers Lower - Microphone 3. Floppy diskette drive 8. Receiver for optional remote control 4. CD-ROM drive -or optional PD drive 9. System LEDs: Upper - Message received Middle - Hard disk active Lower - AC power on 5. Available drive bays

Rear Panel for LS/VS/MS 660

1. Rear of expansion bay 9. Audio 2. VGA port for monitor signal cable 10. Handles to assist during side panel removal 3. Parallel or printer port 11. Security loop for cable or padlock 4. Serial port 2 (not useable if remote control supplied) 12. AC power output for monitor 5. Serial port 1 13. AC power input from supply 6. Port for PS/2 mouse 14. Protection cover for PSU fan DO NOT use to lift system 7. Port for PS/2 keyboard 15. Main side panel lock 8. Dual stacked USB port A Panel fixing screws