|
|
Pentium Based Processor Board
256MB Maximum. Eight 36 bit SIMM sockets. Minimum system configuration =
16MB. 32MB SIMMs are industry standard and are not the same as those used in the XEN-LS
II/PC.
Memory is configured as 128 bit wide, thus SIMMs must be installed in two groups of four,
as follows:
MM1, 3, 5, 7
MM2, 4, 6, 8
e.g. 16MB = 4 x 4MB SIMMs
MB | Make | Model | Type | Part Number |
240 | Quantum | LPS 240S | SCSI | TF50162 |
380 | IBM | 0661 | SCSI | TE48235 |
515 | Maxtor | MXT-540SL | SCSI | TF50191 |
540 | Quantum | LPS 540 S | SCSI | |
1,000 | IBM | 0662 S12 | SCSI | XB52689 |
1,200 | Maxtor | MXT-1240S | SCSI | TE50199 |
2,000 | IBM | 0664 M1H | SCSI | TG51270 |
Tape | ||||
150 | Archive | Viper150 | SCSI | SU52600 |
525 | Archive | Viper525 | SCSI | SU52601 |
1.3GB | Archive | Python | SCSI | TE49468 |
2-8GB | Archive | DDS DAT | SCSI | SU52593 |
Floppy | ||||
2 MB | Sony | MP-F17W-0A | 3.5" | |
1.2Mb | Panasonic | JU-475-4 | 5.25" | |
CD-ROM | ||||
Sony | CDU561 | SCSI | SU52602 |
3Com 32 bit bus master Ethernet card, thin/thick wire (3C527B) | XB50379 |
3Com 16 bit Ethernet card, thin/thick wire (3C523B) | XB48125 |
3Com 16 bit Ethernet card, UTP/thick wire (3C523B-TP) | XB48127 |
3Com 32 bit Ethernet card, thin/thick wire (3C529) | XB51624 |
3Com 32 bit Ethernet card, UTP/thick wire (3C529-TP) | XB51625 |
IBM Token Ring 4/16Mb/s LAN card (25F9528) | XB49546 |
I/O Board
SW1
Switch | 2nd Floppy Device |
5.25" | |
3.5" |
SW2 Misc. Settings (I/O Board)
Switch |
On |
Off |
1 |
Cache Enable |
Cache Disable |
2 |
Flash Enable |
Flash Disable |
3 |
N/A |
|
4 |
N/A |
|
5 |
N/A |
|
6 |
FTs |
FTe |
SW3 CMOS RAM Clear
Position | |
Clear CMOS | |
Normal Use |
SW4 Number of Drives
Switch Position | On |
Dual Drives | |
Single Drive |
SW5 Select 4MB Primary Floppy Drive
Position | |
2MB Floppy | |
4MB Floppy |
Apricot LOC Technology security.
To discharge CMOS use SW3 on the I/O board.