| Code |
Error message |
| 0162 |
BIOS unable to apply BIOS update to processor 1 |
| 0163 |
BIOS unable to apply BIOS update to processor 2 |
| 0164 |
BIOS does not support current stepping for processor
1 |
| 0165 |
BIOS does not support current stepping for processor
2 |
| 0200 |
Failure Fixed Disk |
| 0210 |
Stuck Key |
| 0211 |
Keyboard error |
| 0212 |
Keyboard Controller Failed |
| 0213 |
Keyboard locked - Unlock key switch |
| 0220 |
Monitor type does not match CMOS - Run SETUP |
| 0230 |
System RAM Failed at offset |
| 0231 |
Shadow RAM Failed at offset |
| 0232 |
Extended RAM Failed at offset |
| 0250 |
System battery is dead - Replace and run SETUP |
| 0251 |
System CMOS checksum bad - Default configuration used |
| 0260 |
System timer error |
| 0270 |
Real time clock error |
| 0297 |
ECC Memory error in base (extended) memory test in
Bank xx |
| 02B2 |
Incorrect Drive A type - run SETUP |
| 02B3 |
Incorrect Drive B type - run SETUP |
| 02D0 |
System cache error - Cache disabled |
| 02F5 |
DMA Test Failed |
| 02F6 |
Software NMI Failed |
| 0401 |
Invalid System Configuration Data - run configuration
utility |
| None |
System Configuration Data Read Error |
| 0403 |
Resource Conflict |
| 0404 |
Resource Conflict |
| 0405 |
Expansion ROM not initialized |
| 0406 |
Warning: IRQ not configured |
| 0504 |
Resource Conflict |
| 0505 |
Expansion ROM not initialized |
| 0506 |
Warning: IRQ not configured |
| 0601 |
Device configuration changed |
| 0602 |
Configuration error - device disabled |
| 8100 |
Processor 0 failed BIST |
| 8101 |
Processor 1 failed BIST |
| 8104 |
Processor 0 Internal Error (IERR) failure |
| 8105 |
Processor 1 Internal Error (IERR) failure |
| 8106 |
Processor 0 Thermal Trip failure |
| 8107 |
Processor 1 Thermal Trip failure |
| 8108 |
Watchdog Timer failed on last boot, BSP switched |
| 810A |
Processor 1 failed initialization on last boot |
| 810B |
Processor 0 failed initialization on last boot |
| 810C |
Processor 0 disabled, system in Uni-processor mode |
| 810D |
Processor 1 disabled, system in Uni-processor mode |
| 810E |
Processor 0 failed FRB Level 3 timer |
| 810F |
Processor 1 failed FRB Level 3 timer |
| 8110 |
Server Management Interface failed to function |
| 8120 |
IOP sub-system is not functional |
| 8150 |
NVRAM Cleared by Jumper |
| 8151 |
NVRAM Checksum Error, NVRAM cleared |
| 8152 |
NVRAM Data Invalid, NVRAM cleared |
