To gain access to the removable media drives you must first remove the protective metal plate which covers this area.

Removing Drives

Each drive is attached to a drive tray, which is in turn secured to a drive cage:
 

1. Unplug the data and power cables from the rear of the drive.
2. Remove the two drive tray securing screws from the side of the cage.

3. Slide the tray carefully toward the rear of the cage until it is free from the metalwork.
4. Turn the tray over and remove four screws from the underside of the tray as shown:

5. Lift the tray away from the drive.