|
|
|
Sony CD-ROM CDU511-10/10
Specification
Vendor |
Sony |
Model |
CDU511-10/10 |
Apricot Part Number |
PT15820231 |
Interface |
IDE |
Command Protocol |
ATAPI |
Burst Transfer Rate |
PIO: Md 4, 16.6 MB/s |
DMA: MW 16.6 MB/s |
Form Factor |
5.25" Half Height |
Vertical Mount |
Yes (12cm disks only) |
Performance
Drive Speed, Type |
8.6 - 16x PCAV |
MPC-2 Compliant |
Yes + MPC-3 |
Sustained, Mode 1, Normal Speed |
150 KB/s |
Mode 1, Maximum Speed |
OD: 2400 KB/s
ID: 1290 KB/s |
Sustained, Mode 2, Normal Speed |
170.5 KB/s |
Mode 2, Maximum Speed |
OD: 2728 KB/s
ID: 1466 KB/s |
Average Access time, Normal Speed |
- |
Average Access time, Maximum Speed |
95 ms |
Full Stroke, Normal Speed |
- |
Full Stroke, Maximum Speed |
- |
Buffer Memory |
128 KB |
Audio Line Output |
0.75V @ 47k |
Audio Line Output Position |
Rear |
Audio Line Output Connector |
ATAPI Spec. |
Headphone Output |
0.55V @ 32 |
Headphone Output Position |
Front Bezel |
Headphone Output Connector |
Minijack |
Headphone Volume on Front Bezel |
Yes |
Dimensions
Height |
1.63 in |
41.4 mm |
Width |
5.75 in |
146 mm |
Depth |
8.0 in |
203 mm |
Weight |
1.85 lb |
0.84 Kg |
Environment
Operating
Temperature |
Minimum: 5°C |
Maximum: 50°C |
Non-Operating
Temperature |
Minimum: -40°C |
Maximum: 60°C |
Voltage: |
DC +5V Tolerance: ±5% |
DC +12V Tolerance: ±10% |
Current: |
Hold Track, +5V typical |
- |
Hold Track, +12V typical |
- |
Spin-up/Seek, +5V maximum |
1.3A |
Spin-up/Seek, +12V maximum |
1.8A |
MTBF |
100,000 hrs |
Jumper Settings
Jumper |
Function |
Comment |
CSEL |
Enable Cable Select |
|
SLAVE |
Select Slave mode |
|
MASTER |
Select Master mode |
Default |
|