 |
|
|
Sony CD-ROM CDU621-AP
Specification
| Vendor |
Sony |
| Model |
CDU621-AP/10 |
| Apricot Part Number |
PT16009931 |
| Interface |
IDE |
| Command Protocol |
ATAPI |
| Burst Transfer Rate |
PIO: Md 4, 16.7 MB/s |
| DMA: MW 16.7 MB/s |
| Form Factor |
5.25" Half Height |
| Vertical Mount |
Yes (12cm disks only) |
Performance
| Drive Speed, Type |
12 - 24x, PCAV |
| MPC-2 / MPC-3 Compliant |
Yes |
| Sustained, Mode 1, Normal Speed |
150 KB/s |
| CD Mode 1, Maximum Speed |
OD: 3600 KB/s
ID: 1800 KB/s |
| CD Mode 2, Form 2, Maximum Speed |
OD: 4092 KB/s
ID: 2046 KB/s |
| Average Access time, Maximum Speed |
90 mS |
| Full Stroke, Maximum Speed |
160 mS |
| Buffer Memory |
256 KB |
| Audio Line Output |
0.75V @ 47k |
| Audio Line Output Position |
Rear |
| Audio Line Output Connector |
ATAPI Spec. |
| Headphone Output |
0.55V @ 32 |
| Headphone Output Position |
Front Bezel |
| Headphone Output Connector |
Minijack |
| Headphone Volume on Front Bezel |
Yes |
Dimensions
Height |
1.63 in |
41.4 mm |
Width |
5.75 in |
146 mm |
Depth |
8.0 in |
203 mm |
Weight |
1.85 lb |
0.84 Kg |
Environment
| Operating Temperature |
Minimum |
5°C |
| Maximum |
50°C |
| Non-Operating Temperature |
Minimum |
-40°C |
| Maximum |
60°C |
| Voltage |
DC +5V |
±5% |
| DC +12V |
±10% |
| Current |
Hold Track, +5V typical |
250 mA |
| Hold Track, +12V typical |
500 mA |
| Spin-up/Seek, +5V max |
1.0A |
| Spin-up/Seek, +12V max |
1.8A |
| MTBF |
100,000 hrs |
Jumper Settings
| Jumper |
Function |
Comment |
| CSEL |
Enable Cable Select |
|
| SLAVE |
Select Slave mode |
|
| MASTER |
Select Master mode |
Default |
|
