Info Guide GEN003:
User Guide to CyberWorks

This guide is designed as a quick reference for basic operation of the Cyberworks software and does not contain information on all aspects of the software.

The Cyberworks software supplied with an Apricot Computer is specifically designed to work with the Dataflex PC Comms Office 14.4 modem and may not work with other manufacturers modem hardware.

Only the default settings (see Settings) are supported by Mitsubishi Electric PC Division.

Getting Started

Connecting the modem to the telephone socket
The Dataflex modem is approved for connection to direct exchange lines of the PSTN (Public Switched Telephone Network), but not share lines, “one plus one” carrier systems or some PBX (Private Branch Exchange). The modem has a REN (Ring Equivalence Number) of 1 and when connected to the phone line with other phone equipment the total REN for the line must not exceed the Lines REN capacity, your local Phone line supplier will be able to check and advise you on the total REN capacity of your line.

Turning on an Online machine for the first time
When you first power on the Online PC and run through the installation of Windows 95, you will eventually get the displayed message :

"select the connect button from Control Panel Printers applet to connect CyberWorks print driver to fax port"
OK

Click on the OK button, this message is a Windows 3.x message and is nothing to worry about.

To load CyberWorks, double click on the CyberWorks icon on the desktop.

CyberWorks Program Screen