Qubie (XT compatible) on VX-Net 3.13

A Qubie is an American XT compatible which comes with a "games" card which uses IRQs 2-7 inclusive and gives a clock, a games port and a parallel port. When adding a WD Ethernet card and getting it on to VXNET3.13, the games card should either be removed to free up the IRQs, or it may be possible to disable one of the features to free up an IRQ. Given that the games card is removed, the default config.sys can be used for the WD Ethernet card, but use the following driver switches:

DEVICE=ETHERNET.SYS /SMALL:10 /LARGE:5 /MEMADD:C200

NB: THE BOOT DISK SHOULD BE DOS 3.2

----------oOo----------