VGA Feature Connector on XEN-LS II Revision 'D'
The VGA feature connector on XEN-LS II revision 'D' motherboards, which
is used to provide video pass-through for certain third party specialist video cards, is
wired incorrectly. These additional cards such as "Video Blaster" and
"VideoLogic DVA400" are supplied with a straight-through ribbon cable to connect
the card to the motherboard VGA circuit or VGA adapter. This cable must be replaced or
modified in order for the correct signals to be supplied to the card. Detailed below are
the wiring instructions for XEN-LS II revision 'D' :-
| Motherboard |
Add-in Card |
| 1 |
1 |
| 16 |
2 |
| 3 |
3 |
| 14 |
4 |
| 5 |
5 |
| 12 |
6 |
| 7 |
7 |
| 10 |
8 |
| 9 |
9 |
| 8 |
10 |
| 11 |
11 |
| 6 |
12 |
| 13 |
13 |
| 4 |
14 |
| 15 |
15 |
| 2 |
16 |
| 17 |
17 |
| 18 |
18 |
| 19 |
19 |
| 20 |
20 |
| 21 |
21 |
| 22 |
22 |
| 23 |
23 |
| 24 |
24 |
| 25 |
25 |
| 26 |
26 |
This problem will be corrected in future revisions of the
motherboard. |
