XEN-PC (A1 Motherboard) Password Setup
XEN-PCs fitted with the A1 motherboard, product code prefix
"SH", are shipped with the password jumper in the disabled position. This is
because you cannot load SETUP without a SETUP password being set, when the jumper is in
the enabled position.
JP2
JP2 is used to enable or disable the motherboard security features. When
pins 1 and 2 are connected (the left two pins looking from the front) the security
features are controlled by SETUP, when pins 2 and 3 are connected security cannot be
enabled by SETUP.
Changing the Password
The power-on password can be changed in SETUP or manually.
- SETUP
Ctrl+Alt+Esc invokes SETUP select security
option.
- Manually
First enter the password at the KEY
symbol then reboot the machine (Ctrl+Alt+Del). When the KEY symbol reappears, type the
password followed by a forward slash (/) and the new password. To disable the password,
type password followed by forward slash (/). Up to 7 characters may be used for the
password.
|
