| Possible CPU error
on boot on FT1400 servers
We have had reports on a handful of systems where two
error messages are displayed during boot on the FT1400. These are;-
|
CPU error 3 on timer |
| and |
|
|
Error 810E - CPU failed. |
These are caused by a BIOS error, and can be corrected
by a re-test of the processor.
To clear the error messages, the Processor re-test
option must be set to YES in the BIOS F2 setup under the Server menu.
This will cause a re-test of the installed processor and
clear the error flag, unless there is a genuine CPU error, in which case the appropriate
error message will be displayed.
----------oOo---------- |
