SCO UNIX V/386 3.2 Version 2
General Information
This product commenced shipment on Monday 10th December under the
existing MCA Product Code of SS 43710. Where an upgrade is required from 3.2.0 which does
not meet the requirements outlined in UNIX News 7, then the product can be purchased from
Apricot for £125.00 RRP, the product code is SS46860 and will be available from 21st
December.
An Upgrade to the SCO UNIX Development system will be available in
January, product code is SS46861.
Installation
During installation a few minor issues may need to be resolved. Details
are given below on corrections required.
- To install a second Adaptec 1640 SCSI adapter, alter the file
/etc/conf/sdevice.d to
| ad |
Y |
1 |
5 |
1 |
15 |
330 |
332 |
0 |
0 |
| ad |
Y |
1 |
5 |
1 |
12 |
334 |
336 |
0 |
0 |
then alter the ad line in /etc/conf/cf.d/mdevice to
| ad |
iI |
iHrZCc |
aha |
34 |
34 |
1 |
2 |
5 |
The remainder of the procedure can be achieved running mkdev hd twice to
install the second hard disk.
- When installing TCP/IP a clash will occur with the wdha entry in the
mdevice file mentioned above. Change the wdha line to:
| wdha |
iI |
iHoCc |
wdha |
35 |
35 |
1 |
2 |
-1 |
|
- The values of some kernel parameters may be reduced by installation of
some products (notably TCP/IP). We recommend that the following values are set as a
minimum.
| NFILE |
500 |
NINODE |
500 |
| NS5INODE |
500 |
NPROC |
300 |
| NREGION |
350 |
NBLK128 |
256 |
| NBLK256 |
256 |
|
- The installation will ask for a disk "Master", this is the disk
labelled M1.
----------oOo---------- |
