External 150MB Archive Streamer (Re-Issue)
Please find below some known working settings for the external Archive
150MB unit on Apricot machines.
Software configuration:
|
Card Type: |
Archive |
|
DMA Channel: |
1 (see note below) |
|
Interrupt: |
5 |
|
I/O Port address: |
0x310 |
Note: the DMA channel may need to be changed to 3 if an Apricot
ESDI/SCSI card is installed.
The port address 0x310 avoids a clash with the 3Com 3C523 card in MCA
machines which uses 0x300 - 0x307
Archive VP402 AT bus adapter card hardware configuration would then be
as follows with jumpers fitted as indicated by ON:
| (A) |
IRQ |
|
|
|
|
|
|
|
DRQ |
|
DACK |
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
|
1 |
2 |
3 |
|
1 |
2 |
3 |
|
off |
off |
off |
off |
ON |
off |
off |
|
ON |
off |
off |
|
ON |
off |
off |
| (B) |
BASE I/O PORT ADDRESS |
|
ON |
3 |
|
ON |
4 |
|
off |
5 |
|
ON |
6 |
|
ON |
7 |
|
off |
8 |
|
off |
9 |
|
ON |
10 |
The details above apply only to product codes XP48813, XP48814, XP48815
and XP48816, which are QIC-02 tape units and not the Archive SCSI units as used internally
in the FTs and FTe machines.
----------oOo---------- |
