Installing Sytos Plus for DOS on a VX FT
with a QIC-525 Tape Drive
The following procedure details the method of installing SYTOS PLUS on a
VX FT server with QIC-525 tape drive running MS-DOS:
- Run the install program from the Sytos plus diskette.
- Select the directory where the software will be installed.
- The device drivers menu will then appear. You must select the ASPI
QIC-150 driver for the QIC525 tape drive in the VX FT.
The software will then be copied onto the hard disk.
Before rebooting the machine you must add a device driver to the
CONFIG.SYS file as follows:
DEVICE=ASPI4DOS.SYS /W
This driver checks for the presence of the tape hardware.
This procedure completed, a backup can then be performed.
Versions:
You should be using the following software versions (or later):
ASPI4DOS.SYS version 2.0
SYTOS PLUS version 1.10
----------oOo---------- |
