Qi With Security on VX-Net

It has been found that when using a Qi with On-board Ethernet, Security installed, SECURITY.SYS in CONGIF.SYS, and using it as a workstation on VX-Net, the machine hangs after the username has been entered at the "LOGON:" prompt.

This is caused by the loading of ETHER592.SYS prior to SECURITY.SYS as follows;

:
CONFIG.SYS
DEVICE=ETHER592.SYS
DEVICE=SECURITY.SYS

The solution is simply to load SECURITY.SYS before ETHER592.SYS by swapping their order in CONFIG.SYS;

:
CONFIG.SYS
DEVICE=SECURITY.SYS
DEVICE=ETHER592.SYS

NOTE: The boot disks for other machines should be left as NETGEN creates them.

----------oOo----------