1MB, 4MB, 6MB, & 8MB Memory Modules
See Also
IPB 4022 - IPB 4027 - IPB 4033 - IPB 4044
IPB 4046 - IPB 4060 - IPB 4066 - IPB 4068
1MB memory modules (XB48036) are not supported in XEN-LS systems (Venus
IV). They are supported in XEN-S (Venus I - BIOS must be greater than 1.2.12), XEN-S
(Venus II), Qi 300 (Model Number > 43000) and LANstation (Krypton D & F).
4MB memory modules (XB48038) are currently supplied on daughterboards
fitted with three rows of pins. The smaller third row is a redundant connector and is not
required for normal operation. When installing this module into system units with only two
rows of sockets, use the pinning strips supplied with the module to provide clearance for
the third connector above the motherboard
6MByte memory modules (XB49039) may only be used in XEN-LS 386SX-20 and
LANstation 386SX-20. They may only be installed onto motherboards fitted with 2MByte of
base memory.
8MByte memory modules (XB44940) may NOT be installed into any Qi 300
systems or XEN-S (Venus I) systems. The module may be installed into XEN-S (Venus II),
XEN-LS (Venus IV) and LANstation (Krypton D & F) systems. This memory module requires
the use of a third set of connecting pins, sockets for which are only present on XEN-S
(Venus II), XEN-LS and LANstation. |
